MultiPlus 12/3000/120-50 120 volt (UL 1741 & 458) Fast Shipping

The Victron Energy PMP122301102 MultiPlus combines a powerful 3000VA pure sine wave inverter, 120 amp smart battery charger, and 50 amp transfer switch into one compact unit for reliable power on boats, RVs, off-grid, and backup power systems.

The Victron Energy PMP122301102 MultiPlus is a multifunction inverter/charger designed to deliver seamless AC power and intelligent battery charging from a single compact unit. Advanced features like PowerAssist, PowerControl, and VE.Bus connectivity make it an ideal solution for marine, RV, off-grid, and backup power applications where reliable energy management is essential.

• 12 volt inverter/charger for 120 volt, 60 hertz electrical systems

• Pure sine wave inverter output for sensitive electronics

• 3000VA / 2400 watt continuous output at 25 degrees Celsius (77 degrees Fahrenheit)

• 2200 watt continuous output at 40 degrees Celsius (104 degrees Fahrenheit)

• 1700 watt continuous output at 65 degrees Celsius (150 degrees Fahrenheit)

• 6000 watt peak power

• 120 amp adaptive battery charger for the house battery bank

• Four-stage adaptive charging with storage mode

• 4 amp trickle charge output for a starter battery

• 50 amp automatic AC transfer switch

• Transfers to inverter power in less than 20 milliseconds during shore power, generator, or utility power loss

• PowerControl helps prevent overloading limited shore or generator power sources

• PowerAssist supplements shore or generator power with battery power during peak demand

• Compatible with lithium-ion batteries

• Supports parallel operation for increased inverter capacity

• Supports split-phase system configurations with compatible Victron equipment

• Supports three-phase system configurations with compatible Victron equipment

• VE.Bus communication for system integration and remote monitoring

• Two general-purpose communication ports

• Remote on/off capability

• DC input voltage range of 9.5 to 17 volts

• AC output of 120 volts AC ±2 percent at 60 hertz ±0.1 hertz

• AC input voltage range of 95 to 140 volts AC

• AC input frequency of 45 to 65 hertz

• Maximum efficiency of 93 percent

• Zero-load power consumption of 20 watts

• AES mode power consumption of 15 watts

• Search mode power consumption of 8 watts

• Absorption charge voltage of 14.4 volts

• Float charge voltage of 13.8 volts

• Storage voltage of 13.2 volts

• Auxiliary 32 amp output

• Three programmable relays

• Output short-circuit protection

• Overload protection

• High battery voltage protection

• Low battery voltage protection

• Over-temperature protection

• Protection against AC voltage on the inverter output

• Input voltage ripple protection

• Aluminum enclosure with blue RAL 5012 finish

• IP21 protection rating

• M8 battery connections with dual positive and dual negative terminals

• 6 AWG screw terminal AC connections

• Operating temperature range of -40 to 65 degrees Celsius (-40 to 150 degrees Fahrenheit)

• Maximum humidity of 95 percent non-condensing

• Dimensions: 362 × 258 × 218 millimeters (14.3 × 10.2 × 8.6 inches)

• Weight: 19 kilograms (40 pounds)

• Certified to UL 1741, UL 458, EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 61000-3-2/3-3, and EN-IEC 61000-6-1/6-2/6-3 standards

Verify that your installation uses a 12 volt battery bank and 120 volt AC system, and confirm your battery capacity, charging requirements, cable sizing, ventilation, and compatible Victron accessories before installation.