Order Now VoltMaster Battery Equalizer – 24 Volt Input to 12 Volt Output / 80 Amp

Vanner VoltMaster battery equalizers allow you to run 12-volt loads from your 24-volt battery system. Perfect for transit buses,
private coaches, tour & charter buses, heavy trucks, off-highway equipment, and alternative energy applications.

Vanner 80 Amp Equalizer reliable method of obtaining a 12 volt DC power source from a 24 volt DC electrical systemIn addition to providing regulated 12 volt power, the system ensures that battery voltages remain equal which significantly extends battery lifeThis equalization ensures extended battery life and provides a stable 12 volt supply for operating accessoriesWith the Vanner VoltMaster battery equalizer, you can run 12 volt loads from your 24 volt battery systemPerfect for transit buses, private coaches, tourcharter buses, heavy trucks, off-highway equipment and alternative energy applications12 Volt DC Power from Your 24 Volt DC SystemWith Vanner VoltMaster battery equalizers, you can have an abundance of 12 volt DC power from your 24 volt battery systemOur equalizers allow operation of more reliable and less costly 12 volt lighting and equipment on 24 volt electrical systems, saving you time and moneyExtend the Life of Your BatteriesWith Vanner VoltMaster battery equalizers, the voltage between each 12 volt battery is balanced in a 24 volt series connected battery arrayThis arrangement equalizes the 24 volt battery system and avoids the over/under charge problems associated with other approaches to providing 12 volts of powerA Simple, More Reliable 24/12 Volt SystemWith Vanner VoltMaster battery equalizers, you can avoid the reliability problems associated with complicated and space consuming dual alternators on vehicles, or multiple battery chargers on renewable energy systemsSizes for Any Application NeedWhether you need just 10 amps to operate a two-way radio or 200 amps to support a fully loaded tour bus, Vanner has the right size equalizer to meet your application needsInput Voltage20 to 32 VDCEfficiency;gt;96%Max Input Current (24Vdc) 43AmpsOutput Voltage(Input Voltage/2) +/- 2% – 50 MvOutput Current (12Vdc)0-80 AmpsOperating Temperature-40C to +75CStandby Mode Current @28.4V17 Milliamps nominalStorage Temperature-54C to +95CUL RecognizedYesUser ServiceableNoEnvironmental Considerations Anodized aluminum enclosure provides protection against salt, fungus, dust, water, fuel vapors and all fluids associated with commercial and off-highway vehicle operations. Exposure to splashes and spills is expected, but continuous exposure should be avoidedMounting LocationMounting location should be a flat surface close to the batteries to allow short battery cable runs. The location should be protected from as many adverse environmental conditions as possible, including battery fumes. Vertical mounting with terminals down is recommendedWeight6.3 lbsDimensions (HWD in inches) 9.8 x 8.5 x 2.5