Same Day Shipping Pro Bluetooth Advanced Alternator Regulator

The Wakespeed WS500 Pro is an advanced Bluetooth-enabled alternator regulator that delivers fully customizable smart charging for 12, 24, and 48 volt battery systems with precise voltage, current, and temperature control.

The Wakespeed WS500 Pro is a professional-grade alternator regulator designed to maximize charging performance in marine, RV, off-grid, and commercial power systems. With Bluetooth connectivity, CAN integration, advanced charging algorithms, and extensive configuration options, it automatically optimizes alternator output to match your battery, alternator, and operating conditions.

• Advanced smart alternator regulator

• Compatible with 12 volt, 24 volt, and 48 volt battery systems

• Auto-detects 12 volt, 24 volt, and 48 volt systems

• Fully configurable for systems from 12 to 48/52 volts without hardware changes

• Bluetooth connectivity for wireless monitoring and programming

• Compatible with the Wakespeed Mobile App

• Configure, monitor, troubleshoot, and update firmware wirelessly

• USB Type-B port for programming and firmware updates

• Drives alternator output based on voltage, current, and temperature targets

• Voltage sensing through included harness sense wires

• Current sensing through an external amp shunt

• Factory calibrated for a 500 amp / 50 millivolt shunt

• Real-time charging adjustments using alternator and battery temperature sensors

• Battery temperature and current can also be supplied through CAN with compatible battery management systems

• Basic charging setup available using built-in switches

• Fully customizable charging profiles through the Wakespeed Mobile App

• Eight preset battery charging programs selectable by DIP switch

• Adjustable battery capacity settings

• Adjustable alternator output settings

• Battery identification settings

• Intelligent charging algorithm responds to battery voltage, charge acceptance, battery temperature, alternator temperature, and charging time

• Dynamically limits charging current outside normal battery temperature ranges

• More than 100 advanced configuration settings available through Expert Mode

• CAN communication based on the J1939 protocol

• Supports RJ45/CAT5 CAN cabling

• Supports M12-5 (NMEA and DeviceNet) CAN cabling

• Supports RV-C communication systems

• Compatible with NMEA 2000

• Compatible with Victron VE.Reg systems

• Compatible with SMA systems

• Compatible with LUX systems

• Supports multiple proprietary battery management system CAN protocols

• Ruggedized RJ45 CAN connector

• 23-pin waterproof Ampseal connector

• Selectable P-type and N-type alternator wiring harness compatibility

• Adjustable field output from 0 to 100 percent in one percent increments

• Default field output settings include Large Alternator Mode (10%), Small Alternator Mode (75%), and Halt Power Mode (50%)

• Built-in LED status and fault indication

• Supports remote CAN display integration

• Firmware updates available through USB or Bluetooth

• Two-year limited warranty

• Replaces Wakespeed WS500-PRO

Verify your battery voltage, alternator type, wiring harness polarity, and system communication requirements before installation. Use compatible temperature sensors, current shunts, and CAN accessories to take full advantage of the WS500 Pro’s advanced charging and monitoring capabilities.